Thank you very much for your valuable suggestion! We will solve it as soon as possible!

Category:PCB PCB Stack-up

Group Administrators: 1 | Group Member: 5 | Group Threads: 5

PCB stack-up is an important factor in determining the EMC performance of a product, very effective in reducing radiation from the loops on the PCB.

Community > Groups > PCB Stack-up
Search Results: 5 Threads,1 Pages Post A Thread
0 comments
355 views

Talk Something about Multilayer PCB

Days ago, one of our customer sent us an e-mail and asked something about multilayer PCB and many customers will send us e-mail in order to get the stack-up of our multilayer PCB. And we upload this p...(view more)

Lesley Manley
2019/1/4 16:02:11
0 comments
282 views

Core PCB Board Stack Up Technology

First, Introduction   For the production of core boards, press-fitting is the most important process. There are many problems in the production process that are worthy of resear...(view more)

Numan
2018/12/26 14:48:23
1 comments
1792 views

4 and 6 layers boards stackup for standard 1.6 mm boards

Here are the pictures of layer stackup for 4 layer pcb and 6 layer pcb boards for standard 1.6 mm boards. I got them from one PCB manufacturer. By these pictures, I could clearly know prepreg material...(view more)

Eibert Draisma
2017/4/11 11:55:21
1 comments
1377 views

Guides for 10-Layer PCB Stack-up

A ten-layer board should be used when six routing layers are required. Ten-layer boards, therefore, usually have six signal layers and four planes. Having more than six signal layers on a ten-layer bo...(view more)

Bevis
2017/2/19 14:44:43
1 comments
2474 views

The tips for a good PCB Stack-Up

PCB stack-up is an important factor in determining the EMC performance of a product. A good stack-up can be very effective in reducing radiation from the loops on the PCB (differential-mode emission),...(view more)

Boyce
2017/1/31 20:59:00

Hot Groups

New Groups