Thank you very much for your valuable suggestion! We will solve it as soon as possible!

PCB Design Rules

Group Administrators: 0 | Group Member: 189 | Group Threads: 284

Initially PCBs were designed manually by creating a photomask on a clear mylar sheet, usually at two or four times the true size. Starting from the schematic diagram the component pin pads were laid out on the mylar and then traces were routed to connect the pads. If you have many questions of PCB Design, please come here!

Community > Groups > PCB Design Rules > What is the method of generating rigid-flex design
What is the method of generating rigid-flex design
Reply
Alternate Text 337
Alternate Text 1
Alternate Text 17

Alva

Can anyone suggest a method to use Kicad for a rigid-flex design? My conceptual design is a flexible circuit with a smaller 1 layer rigid pcb adhered to the top of flexible circuit. The top copper would be connected to the bottom copper of the flex circuit with a PTH. My top, rigid copper does not need to connect to the inner flex copper, and no blind vias, which makes it easier to indicate plate through. However, I will have SMD parts on all "exposed" copper layers. But Kicad does not let me rename or rearrange the layers. All the copper layers are in the middle of the board. Anyone can help me for this problem?
17 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

PAWEL WYSZYNSKI

Excellent work. I am impressed.

Hot Threads

New Threads