Thank you very much for your valuable suggestion! We will solve it as soon as possible!

SMT Stencil

Group Administrators: 1 | Group Member: 43 | Group Threads: 39

The purpose of an SMT stencil is to transfer solder paste to a bare circuit board. Before the assembly of the SMT components solder paste is printed onto the component pads of the printed circuit board by stencil, which are today usually manufactured from steel, more rarely from nickel or polyimide.

Community > Groups > SMT Stencil > Stencil foils delaminating
Stencil foils delaminating
Reply
Alternate Text 434
Alternate Text 0
Alternate Text 28

juanbrito

We are having continual problems with our stencil bindings falling apart in our washer.
We use a PMR5000 ultrasonic with Vigon sc2000 cleaning fluid. We cycle them in the washer for about 9 minutes.
The fluid sometimes heats up to 105 deg F.
Our stencil house has switched us to a more robust binding glue. Even with this new glue we are starting to see delamination after multiple wash cycles.
Does anyone else have this problem ?
28 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Burke

Remarkable.Great help to my learning.

Eugene Shamaev

Glad to read such a marvelous article here. You are a genius.

Augus

My friends and I have learned a lot with your post. And we will keep on following you for the further study.Hope your next article will come soon.

Leo Korbee

Very impressive posting. Thank you for your efforts.

Hot Threads

New Threads