Thank you very much for your valuable suggestion! We will solve it as soon as possible!

PCB Assembly Service

Group Administrators: 1 | Group Member: 252 | Group Threads: 383

In assembly the bare board is populated with electronic components, called a "printed circuit board assembly" (PCBA). In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB.

Community > Groups > PCB Assembly Service > Stamping SMT assemblies
Stamping SMT assemblies
Alternate Text 627
Alternate Text 1
Alternate Text 23

Yair Almanza Armenta

We seem to have an accountability issue when it comes to operators building defective product. Currently we are putting a piece of masking tape with the assembly, work order, and operator initials on our black trays at the end of the reflow oven. I have noticed that as the boards progress through SMT and other areas, those pieces of tape with initials on them seem to get mixed up or end up getting replaced with someone else's (other areas) label.
My suggestion to my boss is that we give each of the operators a small rubber stamp with their own # on it. Instead of putting their initials on a removable piece of masking tape, they will put a discreet number somewhere on the board.
Does anyone have any experience with this? Can you give me the name of a company that produces stamps for this purpose ?
Statement: This post is only the personal view of the author and does not represent the opinions of


Remarkable.Great help to my learning.

Hot Threads

New Threads