PCB Terminology

2017/2/11 7:11:02

It is always good to know a bit of PCB terminology. Here is a reference table with the most common words.
Bookmark it (Ctrl-D) and use it for when you stumble upon any PCB words that you don’t know.
Term Meaning
Thou A “thou” is a thousandth of an inch and equivalent to a “mil”.
Mil A “mil” is a thousandth of an inch and equivalent to a “thou”.
mm “mm” is short for millimeter, a thousandth of a meter.
ESD Electrostatic discharge caused by static electricity.
Trace A path made of copper on a PCB. It is used in the same manner as electrical wires, to connect the components of a board.
Via A hole with copper inside to provide electrical connection between a trace on one layer to a trace on a different layer of the PCB.
Pad Pads are used to solder surface mount devices to the board.
Annular Ring The annular ring is the area that is left of a pad after a hole has been drilled in it. For example to make a solder pad for a through-hole component.
Silkscreen Markings of component names, values and outlines on a PCB for simpler assembly and debugging. Usually white.
Solder Mask or Solder Resist A substance that solder won’t stick to. Used to make sure traces are insulated electrically and physically. This is usually applied to the whole board except from where there are pads to be soldered.
Surface Finish A layer on top of pads to prevent the copper layer from oxidation.
Gerber File A file in the Gerber Format that is used as a universal way of telling manufacturers how to create your board.
Through-hole Components Components that have leads which go through the board and are soldered on the other side.
Surface Mount Devices (SMD) Components that are soldered on pads on the surface of your PCB instead of through holes.
Panelizing Manufacturers often create one huge PCB with many identical board designs on it. The huge PCB is then cut into individual boards. This is called panelizing.
Single-sided PCB A PCB with traces and pads only on one side of the board.
Double-sided PCB A PCB with traces and pads on both sides of the board.
Multi-layer PCB A PCB with traces and pads on both sides of the board in addition to traces on layers within the board itself.
PCBA Some companies offer Printed Circuit Board Assembly (PCBA). This basically means that they solder the components to your board for you. Very convenient =)
FR-4 Substrate The most commonly used material for creating PCBs.
RoHS Restriction of Hazardous Substances. A European law intended to protect the environment.
If you know the PCB terminology from the above table, you’ll understand most of my articles on how to build electronic circuits.

Learning To Build Your Own PCB’s

It’s super useful to know how to design your own circuit boards. It will help you build advanced projects like MP3 players, LCD Screens, Quadcopters, you-name-it. I waited too long before I learned it. So I created this simple course for you so you can learn it too.

jeorge daniel

2017/2/13 7:11:02

Thanks for the article. Very valuable.


2017/2/13 7:11:02

Marvelous posting.

You might like


  • Threads


  • Following


  • Followers


PCB Prototype

PCB Instant Quote

x mm


Quote Now

PCB Assembly