It is certainly possible, as edge plating is no big deal its simply a matter of routing the slots at the same time as drilling the via holes prior to electroless copper plating.
Rafael Mendoza
9/9/2016 6:11:28 AM
If what you want is solid edge plating, it is possible. But you will have to ask your pcb house if they can do it.
tony165
8/4/2016 8:05:34 PM
I have seen the board used on radio product has its edges plated so that it makes contact with the metallised housing and screens.
Clark
7/29/2016 7:44:16 PM
I am doing a new project. Your posting is pretty good and useful to my job.Thanks a lot. Hope you can write again.
Fabián Do?aque
12/5/2016 6:42:02 AM
It is certainly possible, as edge plating is no big deal its simply a matter of routing the slots at the same time as drilling the via holes prior to electroless copper plating.
Rafael Mendoza
9/9/2016 6:11:28 AM
If what you want is solid edge plating, it is possible. But you will have to ask your pcb house if they can do it.
tony165
8/4/2016 8:05:34 PM
I have seen the board used on radio product has its edges plated so that it makes contact with the metallised housing and screens.
Clark
7/29/2016 7:44:16 PM
I am doing a new project. Your posting is pretty good and useful to my job.Thanks a lot. Hope you can write again.