PCB companies in center/south Europe usually use mil.
Nigel?Nichols
9/4/2016 7:16:20 PM
Most use Mils
You will find it very convenient if you use mils.Because most PCB manufacturers also use mils and also the datasheets are in mils as a more easy way.
Greg Smart
8/23/2016 4:23:08 AM
Mils is mostly used. But sometimes you can use mm, such as If you are using the newer 2mm pitch parts
Andrew?Ward
6/9/2016 10:20:21 PM
Meter is the common measure standard in my country , so I converted every inch-based value to millimeters and used it in my CAD-tool.
Paolo
10/16/2016 8:28:18 PM
PCB companies in center/south Europe usually use mil.
Nigel?Nichols
9/4/2016 7:16:20 PM
Most use Mils You will find it very convenient if you use mils.Because most PCB manufacturers also use mils and also the datasheets are in mils as a more easy way.
Greg Smart
8/23/2016 4:23:08 AM
Mils is mostly used. But sometimes you can use mm, such as If you are using the newer 2mm pitch parts
Andrew?Ward
6/9/2016 10:20:21 PM
Meter is the common measure standard in my country , so I converted every inch-based value to millimeters and used it in my CAD-tool.