Category:PCB PCB Manufacturing

Group Administrators: 1 | Group Member: 277 | Group Threads: 436

PCB manufacturing consists of many steps, such as PCB CAM, Panelization, Copper patterning, etc. This group is mainly talked about the problems during PCB manufacturing!

Thread Reply
PCB Copper technology Reply 2017-05-10 11:04:18

Eibert Draisma

Leave A Message


Copper technology equipment: desmear, PTH and PP triple automatic production line.

The safety of copper technology:
1. You must wear strong acid and alkali strong plastic gloves, gas masks, protective goggles, protective masks, resistant to strong acid and alkali work shoes, work aprons and other corresponding security insurance supplies.
2. The recycling should to be fully utilized to achieve the national standard of renewable energy resources.
3. Air will contain NO, NO2, HCHO and other irritating toxic gases, the workshop staff should wear the corresponding supplies, and workshop pumping should be open all day.
4.Pay attention to check the syrup level is normal (in line with the tank level instructions).
5.Pay attention to the control panel on the temperature indicator and filter circulation pump is normal.
6. All the liquid tank must be kept clean, to avoid dust and other pollution.
7.Pay special attention to the backlight test and analysis when finding that the backlight is not norma.
8.Check the swing, automatic dosing, regeneration devices, AC adapter, etc. are running well.

Statement: This post is only the personal view of the author and does not represent the opinions of

Luis Fernando

Leave A Message


I prefer more detailed information.