Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 188 | Group Threads: 217

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
Wave solder bridging Reply 2017-02-01 19:52:42
235 views
5 comments
11 likes

tim

Leave A Message

Follow

I do not have a lot of specs at the moment. I just wanted to get some opinions and some of you thinking. I will get some part specs and add to this post later.
WE are running a pretty big PCB and ther are some connectors on the edge of the board. The connector has a bridge about 98% OF THE TIME. We can rotate the board 180 and the connector still bridges. The connector is on the leading edge or trailing edge of the board flow. Any tips or suggestions.
11 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Unai

Leave A Message

Follow

Really appreciate your content.I hope you write again soon.

Pierre Mainardi

Leave A Message

Follow

What you share on your post is quite useful.

Bruno Vicente

Leave A Message

Follow

I appreciate your article very much. Wait for your next writing.

osman

Leave A Message

Follow

Have marked your post. Keep on your great job. Hope your next writing soon.

Jeff Hanenkrat

Leave A Message

Follow

Nice content you’ve posted in here
ThreadReply