Category:PCB PCB Manufacturing

Group Administrators: 1 | Group Member: 277 | Group Threads: 436

PCB manufacturing consists of many steps, such as PCB CAM, Panelization, Copper patterning, etc. This group is mainly talked about the problems during PCB manufacturing!

Thread Reply
4 layers PCB VS double sided PCB with components both sides, which one is cheaper? Reply 2016-05-05 17:05:44
281 views
4 comments
3 likes

Bernie

Leave A Message

Follow

Which method is cheaper from the following two: 1.Having a double sided PCB , with surface mount components on both sides; 2.Having a 4 layered PCB, with surface mount components only on one side.
3 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Mario1971

Leave A Message

Follow

I think you are not making a blanket call. What if, the solder side has to have wave soldered components with SMT?

patumvan.a

Leave A Message

Follow

You can ask the PCB manufacturer to get right answers.

Igor

Leave A Message

Follow

It is the number of layers and board area that primarily determines the cost. So the PCB manufacturer do not care whether you have componentns on one side or two sides.

dinotavone

Leave A Message

Follow

An interesting post.
ThreadReply