Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 186 | Group Threads: 220

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
Factors that cause circuit board solding defects Reply 2017-05-08 14:07:52
217 views
1 comments
509 likes

Enrico Gensale

Leave A Message

Follow

There are several factors that cause circuit board solding defects:
First, the solderability of the hole.
If circuit board hole solderability is not good, it will affect the circuit components of the parameters, resulting in conduction instability, causing the entire circuit function failure.
Second, warping
Circuit boards and components in the soldering process may produce warping, causing short circuit and other defects. Warping is often due to the imbalance of the upper and lower parts of the circuit board or due to the weight of the circuit board itself.
Third, PCB design
If the board size is too large, the printed line length and impedance will increase, anti-noise ability will decrease and cost will increase;if board is too small, the welding is not easy to control and prone to adjacent lines interfere with each other, such as circuit board Electromagnetic interference and so on. How to optimize the PCB file?
1. shorten the connection between high-frequency components, reduce EMI interference.
2. heavy (such as more than 20G) components, should to be fixed bracket and then welding.
3. thermal components should be away from the heat source.
4. the arrangement of components as parallel as possible, making it easy to weld.
509 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Jana Velicova

Leave A Message

Follow

important manufacturing process
ThreadReply