Category:PCB Assembly PCB Assembly Service

Group Administrators: 1 | Group Member: 249 | Group Threads: 393

In assembly the bare board is populated with electronic components, called a "printed circuit board assembly" (PCBA). In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB.

Thread Reply
PT500 application software Reply 2017-03-01 01:25:35
157 views
1 comments
18 likes

Fly

Leave A Message

Follow

Hi lads, Can anyone tell me a bit about PT500 application software? I recently had to replace the Hard drive in the host PC for our wave. I re-loaded the system software and re-configured. One thing I noticed however is in the "Calibrate T/C's" option, there was a -20 deg offset in the "solder temp", and I dont know if this was there previous to reloading the software. I checked my solder temp with a handheld temp unit and verified there was a 20deg delta in the displayed actual temp. I want to know if this setting is located on the system software (as found in the hard drive) or does it exist in an EPROM on the motherboard?
Thanks
18 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Leo Korbee

Leave A Message

Follow

Useful!
ThreadReply