Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 188 | Group Threads: 217

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
LF Wave Solder - SN100C Reply 2017-02-27 17:25:16
323 views
4 comments
17 likes

Marco

Leave A Message

Follow

We have been using a selective solder system for all of our automated LF through hole processing to this point. It has served us well but volumes are increasing and we are getting ready to pull the trigger on a full size wave machine to handle the larger numbers.
We have been using SN100C in our selective equipment (only a 30 lb pot) and now need to determine if we are sure enough about SN100C to fill a 1500 lb pot full of the stuff. We have been very happy with the soldering results for this alloy.
We have no customer requirements to use SN100C so there are no real limitations in selecting another alloy. Cost is obviously a major factor in all of this.
I'd like to hear from people who are using SN100C in a full size wave and the pros and cons you've encountered. Would also like to hear from those using something different and why.
17 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Bradley

Leave A Message

Follow

Remarkable.It help me a lot. Thank you.

Carr

Leave A Message

Follow

A good and help piece of info.

Jorge Arizaga

Leave A Message

Follow

Your post answered my questions. Thanks a lot.

dayji

Leave A Message

Follow

very useful informations.
ThreadReply