Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 188 | Group Threads: 217

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
Stainless Steel Stencils Reply 2017-02-11 00:55:54
691 views
1 comments
107 likes

Manuel

Leave A Message

Follow

With the growing number of SMDs (surface mount devices) and the decline in the availability of through-hole parts, more and more electronic hobbyists, designers, and inventors are using surface mount components.
As the name implies, SMDs are soldered directly to the surface of printed circuit boards with no mounting holes and, while they can be soldered by hand, a better technique requires accurate placement of solder paste to the pads, parts placement, and subsequent reflow soldering in an oven.
Currently, the best way to accurately dispense solder paste is through the use of a stencil.
Which Stencils?
Although polyimide stencils are great for many projects, they do have a lifespan of a few dozen uses, and they can easily be damaged by careless handling. The gold standard for solder paste stencils is actually a "steel" standard — stainless steel, that is. They are more durable and more precise than polyimide, but the price has put them out of the reach of hobbyists and other low-volume users until now.
A small .004" thick stainless steel stencil with precision laser-cut apertures.
For a closer look at how polyimide and stainless steel stencils compare, check out this write-up (PDF).
Inside the Stencil-Making Process
Although it's not obvious in the photos, the G 6080 is a beast, weighing in at over 4,400 pounds. It is the standard by which all stencil lasers are judged, and is a heavyweight in performance as well as size. The G 6080 is capable of cutting 51,200 apertures per hour in materials up to 1 millimeter thick. Its laser repetition rate is up to 45 kHz with axial precision and repeatability of +/- 2 µm. Its right-angle precision is 4 angular seconds, and it can make cuts as small as 0.00078 inches.
Despite strides made in polyimide stencils, despite their popularity and affordability, stainless steel stencils remain highly sought after.
107 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

wolffdp

Leave A Message

Follow

Pretty good and useful info to my job. Keep on checking your post.
ThreadReply