Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 188 | Group Threads: 217

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
No solder and solder bridge after wave solder Reply 2017-02-01 23:20:43
270 views
4 comments
23 likes

Fatih YASAR

Leave A Message

Follow

Hi, We have a board with over 100 chips (mixed size) and some long Connector DIP through out Wave solder with many issues of no solder and solder bridge, (using clean flux with bubble fluxer and Kester solder bar). Currently we tried to reduce the defects but can not kill them..Need your helpful advices.
23 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

kementze19

Leave A Message

Follow

Your sharing is quite useful to my new project. Thanks a lot.

sam adnan

Leave A Message

Follow

The article has really peaked my interest.Hope you can write again soon.

cgr-pcb

Leave A Message

Follow

Like this post very much.

Francisco Marquez

Leave A Message

Follow

Great help to my new project.
ThreadReply