Category:PCB PCB Layout

Group Administrators: 1 | Group Member: 91 | Group Threads: 104

The connections on a PCB should be identical to its corresponding circuit diagram, but while the circuit diagram is arranged to be readable, the PCB layout is arranged to be functional, so there is rarely any visible correlation.

Thread Reply
Simple Ldr circuit help with PCB Layout Reply 2016-10-19 19:50:46
248 views
2 comments
10 likes

Martynas

Leave A Message

Follow

Could you process this through some PCB software for me so I could print this to a copper board for my project
10 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

roberts.trops

Leave A Message

Follow

Use as high a speed as possible, drill press, carbide bit, gentle feed rate. Don't have a drill press? Get one. A must one of those drill press mounts for a dremel style rotary tool would be great for PCBs, with the high spindle speed.

Amir Aliabadi

Leave A Message

Follow

The circuit is simple enough that you can simply draw the traces onto a piece of board material with a permanent marker exactly as in the schematic, then etch it yourself. No fancy layouts are necessary. Just orient your components as in the diagram & drill the holes in the board material. Then use the marker to draw in the traces. Make sure the marks are thick and black.
ThreadReply