Category:PCB PCB Equipments

Group Administrators: 1 | Group Member: 64 | Group Threads: 66

All of the pcb manufacturing equipments is supposed to provide high quality PCB assembly solutions for high mix, small to medium batch requirements.The manufacturing facilities should be continously invested to increase efficiency and maintain product quality.

Thread Reply
PCB Tools and Wristwatches Reply 2017-02-13 06:05:46
362 views
1 comments
24 likes

luizleo2001

Leave A Message

Follow

Low Cost Printed Circuit Board Tools
We’ve seen mills, lathes, CNC machines and 3D printers, but if there is any device that gets a hardware hacker’s attention, it’s a pick and place machine. In the PCB industry these machines pick up thousands of parts every hour, perfectly placing them on printed circuit boards. The downside is they’re incredibly expensive. The cheapest Chinese machines without vision start in the $4000 USD price range.
Neil aims to break down those price barriers with a $300 Pick and Place Machine that doubles as a 3D printer. He’s using delta 3D printer hardware to do it, and he’s throwing in everything! OpenCV based vision, multiple tool heads, reel and tray pick up, Neil has covered all the major points. He can’t do it alone though, so he’s looking for help. Check it out, and give him a hand (or a skull)!
A low-cost pick and place machine will need printed circuit boards to work on. Not to worry, shlonkinhas you covered with his PCB mill for under $10. Built from recycled printers, an Arduino, and host software written in processing, shlonkin has already posted impressive photos of boards his machine has milled. The main problem shlonkin has run into is longevity with plastic parts. In his most recent update, he’s looking for ideas. Can you help him?

Digital Watches

Anyone will tell you that digital watches are a pretty neat idea. With the era of smartwatches upon us, more than one hacker has delved into building their own timepiece. We’re happy to report that most of them even tell time.
Walltech has gone all out to create the ultimate watch. His OLED Smart Watch 6.0 is the culmination of years of work. The watch features a 1.5” OLED display, an SD card slot, and a vibrator motor. It has Bluetooth 4.0 to connect to the world, and an Atmel ATmega32u4 as its brain. A 500mAh battery will power the watch for 18-24 hours per charge.
Walltech plans to make it do everything from SMS and email notifications to music streaming. Don’t see a feature you want? Add it! Smart Watch 6.0 Is completely open source, so you can hop into the code and hack away!
On the other side of the spectrum is Tilt Touch Time, which utilizes those awesome bubble LED displays some of us remember from the 70’s. The retro look is only 3D printed skin deep though, as  is using an ATtiny2313 processor. Atmel’s Qtouch is providing the capacitive touch sensing, while a tilt sensor helps Tilt Touch Time live up to its name. He has submitted his watch to The Hackaday Prize, so he’s trying to figure out a way to use the touch sensor to sync time with a PC. If that doesn’t work out, we bet those bubble LEDs would make great light sensors for some monitor-blink-sync action.
24 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

ErikLee

Leave A Message

Follow

This post is perfect for what I need. Thanks!
ThreadReply