Category:PCB PCB Design Rules

Group Administrators: 1 | Group Member: 167 | Group Threads: 262

Initially PCBs were designed manually by creating a photomask on a clear mylar sheet, usually at two or four times the true size. Starting from the schematic diagram the component pin pads were laid out on the mylar and then traces were routed to connect the pads. If you have many questions of PCB Design, please come here!

Thread Reply
Some preparations of CE compliance Reply 2016-04-18 13:17:17
224 views
2 comments
11 likes

Alessio Galliazzo

Leave A Message

Follow

Regarding the CE compliance requirements, we need to start from early stage of design, schematic and finally PCB. Is there any document or tutorials to recommend? As the book is to hard to read.
11 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Earl

Leave A Message

Follow

If you have a smart design and you are a bit careful with the PCB layout, there is normally no problems. There are many useful presentations on the web that will quickly help you to understand the main points.

Ellis

Leave A Message

Follow

The one most relevant to the layout is the EMC. Wht you only need to is spent a few days reading on the web and it will make you clear, as I said it is a very complex topic and I can't really summarise it in a post.
ThreadReply