Category:PCB Assembly PCB Assembly Service

Group Administrators: 1 | Group Member: 250 | Group Threads: 390

In assembly the bare board is populated with electronic components, called a "printed circuit board assembly" (PCBA). In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB.

Thread Reply
Required humidity for SMT production and storage Reply 2017-02-01 21:05:05
287 views
5 comments
22 likes

Berg

Leave A Message

Follow

Our SMT production and storage area is air-conditioned, constant temperature is maintained but the humidity is not controlled , the raw SMT material is stored in a "Drier" cabinet, but since we assemble hybrid SMT and thru-hole PCB assemblies, the SMT subassemblies are not kept in a humidity controlled environment. What is the optimum humidity for assembled SMT components.
22 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Carlos Ruiz

Leave A Message

Follow

Thanks for your intelligence. Pretty interesting and useful.

Rob

Leave A Message

Follow

Marvelous posting.

petrstudeny

Leave A Message

Follow

My friends and I have learned a lot with your post. And we will keep on following you for the further study.Hope your next article will come soon.

Blake

Leave A Message

Follow

Your post answered my questions. Thanks a lot.

marcolastri

Leave A Message

Follow

Excellent work. I am impressed.
ThreadReply