You don't have to do wave soldering for the THT parts.
There's a technique called THR, which refers to through-hole reflow
that works for certain components like connectors.
taylor_john_z
2016/10/6 21:30:26
If you mix SMT with THT , you may need to do wave soldering after
reflow soldering for single-sided board. Assembling pin in paste
connections by design is a way to avoid this problem. Hole size and paste
aperture size are selected to reflow the THT header at same time as
SMT parts. Consult with Process Engineers for best results.
Antonio Rubio Llorca
2016/12/30 3:51:21
You don't have to do wave soldering for the THT parts. There's a technique called THR, which refers to through-hole reflow that works for certain components like connectors.
taylor_john_z
2016/10/6 21:30:26
If you mix SMT with THT , you may need to do wave soldering after reflow soldering for single-sided board. Assembling pin in paste connections by design is a way to avoid this problem. Hole size and paste aperture size are selected to reflow the THT header at same time as SMT parts. Consult with Process Engineers for best results.