Get started now
Image for panelized board ↓ (for reference only)Scaling：/1
Tip: Thanks for your order! Please note that your final payment is subject to our engineering review and about 5-10% of customers' orders may need extra charge.
We fabricate PCBs from 1 layer to 40 layers. Our capabilities include HDI PCBs, Rigid PCBs, Flex PCBs and Rigid-Flex PCBs. For very sophisticated PCBs, we can go down to 1.25 mils trace width / spacing. We can service all your high-tech PCB requirements such as special materials, special thicknesses, blind/buried vias, metal cores, filled vias, stacked or staggered laser vias, 0.5 mm pitch BGAs, etc.Please kindly email to service@ALLPCB.com for more request !
"Accept Crossed-out Panel" means there will be one or more bad individual board(s) in the panel.
Image for required panelization way ↓ (for reference only)
Image for ALLPCB recommended panelization way ↓ (for reference only)
0.00mm X 1，0.00mm X 1 is recommended，Finished panel dimension：mm X mm，If rail edge is required, adding on the longer side is recommended