20 Common Everyday Sensors
20 common sensors and uses: temperature, pressure, motion, optical, gas, biosensors for consumer, industrial and scientific applications.
20 common sensors and uses: temperature, pressure, motion, optical, gas, biosensors for consumer, industrial and scientific applications.
Learn how sensor fusion (Kalman filters, IMUs, GPS, LiDAR, sonar, accelerometers) combines sensors to improve drone and robotic navigation.
Explore ultrasonic sensor principles, hardware, time-of-flight distance measurement, common types and selection tips for accurate ranging.
Multifunction sensors, digital twins and open architectures unify EW, ISR, targeting and C2 to speed decision advantage in multi-domain operations.
Learn CMOS image sensors: key terms, functions, applications, and CMOS vs CCD differences for cameras, smartphones, medical and industrial imaging.
Flexible Bi-Te 3D spiral temperature-pressure sensor for wearable electronic skin—high sensitivity, fast <1s response, dual-parameter mapping.
Why industrial camera frame drops come from camera buffers, vision software, or PC drivers—not the interface—and how to avoid data loss
Satellite radar architecture and TI AWR2544 enable centralized ADAS processing, improved sensor fusion, scalability, and automotive safety.
Review of on-chip silicon LiDAR: integration, scanning methods (OPA, LABS, flash, SLG), FMCW vs TOF, challenges and outlook for automotive use.
Explore CMOS image sensors: FSI limits, BSI breakthroughs for better low-light QE, smaller pixels, and impacts on VR, AR, and automotive imaging.
Dual-wavelength TDLAS enables concentration-immune high-temperature pressure sensing (1343/1392 nm), 3% accuracy and 20 kHz rate up to 1273 K.
University of Michigan study shows submarine fiber-optic cables using DAS could offer a cheaper, broader tsunami early-warning alternative to buoys.
Explore engineering power (EP) for shared power/data, SPI over long distances, LC filtering, and voltage-drop analysis.
3D printing and additive manufacturing reviews AI-driven materials, design workflows, FAA-certified parts, and on-demand production for engineers.
Optimize camera-lens pairing for machine vision: avoid Nyquist pitfalls, aim for half-Nyquist, check MTF and contrast (>=20%) with lens testing.
Drive motor speed sensor: excitation with sine/cosine coils detects rotor position, speed and direction, sending signals to control module and VCU.
Explore the challenges of Image SoC design for network cameras, focusing on ISP, video compression, and low-power techniques.
Miniature thermostat using 40 AWG copper as combined sensor-heater: I2R self-heating, resistor-set temperature control, calibration & mounting tips
Review of tactile sensor arrays: fabrication methods, crosstalk mitigation, multifunctional integration, ML data mining and wearable applications.
Learn IMU preintegration for visual-inertial odometry: efficient IMU summarization, covariance propagation, and improved VIO optimization.