Can Cable Shielding Solve All EMC Problems?

Master automotive cable shielding for high-speed data. Learn to prevent noise, crosstalk, and ground resonance with proper termination & grounding methods.

Lightning Surge Test System Components and Operation

Overview of surge test system design per GB/T 17626.5-2019, covering combined wave generator operation (1.2/50us-8/20us), calibration and standardized test procedures.

SMPS EMC Case Study: Radiated Emissions

Failed EMC radiated emissions? See how we fixed SMPS noise using an RC snubber and common-mode choke. A practical guide to troubleshooting and compliance.

Devices That Produce Ionizing Radiation

Overview of devices producing ionizing radiation (radiation therapy, nuclear medicine) with contrasts between electromagnetic and ionizing radiation and safety measures.

Basic Power Supply Filter Design

Overview of filters: definitions, frequency and loss classifications, Butterworth/Chebyshev/Bessel designs, and key parameters like insertion loss.

EMC Testing in Reverberation Chambers: Principles

Discover the principles of reverberation chambers for EMC testing. Learn their advantages over anechoic chambers, key parameters, and test system setup.

EMC Design Considerations for HDMI Interfaces

Technical overview of HDMI EMC design, detailing interface circuitry, component placement, and PCB layout guidelines to maintain signal integrity and meet EMC compliance.

EMC: Radiated vs. Conducted Emissions

Understand the difference between radiated and conducted emissions. Our guide covers EMI principles, test methods, equipment like antennas & LISNs, and setups.

Electromagnetic vs Ionizing Radiation: Key Differences

Learn the differences between electromagnetic and ionizing radiation, health risks, and key safety standards (ICNIRP, ICRP) and exposure limits.

Main Sources of Electromagnetic Interference in PLC Systems

Technical overview of electromagnetic interference in PLC systems, sources, grounding issues, and practical countermeasures including signal isolators and cabling.