FPGA-Based SoC Solutions for ARM System Integration
Analysis of ARM-based SoC FPGA single-chip architectures for embedded systems: benefits in performance, power, cost, and a motor-drive control example.
Analysis of ARM-based SoC FPGA single-chip architectures for embedded systems: benefits in performance, power, cost, and a motor-drive control example.
FPGA hardware acceleration guide for engineers: profiling hotspots, choosing custom instructions vs memory-mapped peripherals with DMA, and CRC implementation trade-offs.
Technical overview of GPIO for microcontrollers: modes (input/output, pull-up/down, open-drain, push-pull), interrupt use, and peripheral multiplexing.
Embedded watchdog technical overview: operating principle of the watchdog timer, anomaly detection, fault isolation and reset strategies to improve system robustness.
Comparative overview of FPGA and embedded systems: strengths, typical applications, and guidance for choosing based on performance, power, cost, and market demand.
Step-by-step guide to porting the Boa embedded web server to an ELF1 development board, including cross-compile setup, compat.h fix, configuration and deployment.
Overview of RTOS vs bare-metal scheduling: polling, foreground-background, and multithreaded models, trade-offs in real-time responsiveness, complexity, and resource use.
Overview of DC current sensing: low-side and high-side shunt measurement, integrated meters (INA229), and Hall-effect sensors, with accuracy, applications, and trade-offs.
Nonlinear ultrasonic evaluation of porosity in RTM textile composites: methods, pulse?train excitation, transducer selection, FFT harmonic analysis and system design.
Diagnostic case of a Mercedes E260L where LIN bus oscilloscope decoding pinpointed a failed in-cabin particulate sensor (B31/4) causing PM2.5 display loss; sensor replaced.
DIY thermal camera using ESP32 and MLX90640: 32x24 IR sensor, 2.4" TFT display, USB battery charging with power-path switching, KiCad schematics, PCB and 3D models.
Technical overview of memory alignment in embedded systems: reasons, ARM/MMU requirements, atomicity, NEON constraints and cache-line effects on performance.
Explains Redis-based distributed lock strategies—from SETNX to atomic SET with EX/PX, unique owner IDs, and Lua scripts—to prevent cache stampede.
Overview of C data types, variables, integer/float/char representations, memory sizes and IEEE?754 layout, plus implicit and explicit type conversion rules for C.
Guide to configuring Synopsys Design Compiler startup: using .synopsys_dc.setup, defining target/link/symbol/synthetic libraries, startup modes, synthesis workflow and DC commands.
Practical guide to Linux TCP tuning from server perspective: connection queues, receive/send buffers, Ring Buffer, QDisc, NIC multi-queue and offload settings.
Guide to monitoring CoreDNS in Kubernetes: configure Prometheus to scrape CoreDNS metrics, and monitor errors, latency, traffic, saturation and cache performance.
Concise guide to common Linux interview questions covering system administration, core commands (rm, ps, grep, tar), kernel components, LVM, bonding modes, and troubleshooting.
QSPI protocol overview and QSPI flash driver: modes (Config, Memmap), read/write/clock details, EDMA transfers, and AUTOSAR Flash driver usage and best practices.
Gait recognition on an embedded Allwinner V853 board using NPU acceleration, detailing PyTorch-to-NB model conversion, CPU preprocessing/postprocessing and CASIA-B evaluation.