SIMO Switch Regulators Extend Battery Life in Wearables

Technical overview of SIMO (single?inductor multiple?output) buck?boost PMICs for space?constrained devices, reducing component count and quiescent current.

Design Challenges for Wearable Health Devices

Overview of wearable health and fitness device architecture and the MAXREFDES100 hSensor reference design, covering sensors, AFEs, MCU, power, and BLE.

Battery Management for Always-On Wearables

Overview of lithium-ion battery management for always-on wearables, covering requirements, fuel-gauge and protection features of Maxim's MAX17301X+ and Adafruit cells.

Haptic Feedback Technology Explained

Overview of haptic feedback technology, actuator selection, and smart cabin design for automotive interfaces; applications in VR/AR, wearables, and accessibility.

DuPont Liveo, STMicroelectronics: Smart Wearable Patch

Overview of DuPont Liveo and STMicroelectronics' smart biosensing patch prototype for remote biosignal monitoring, integrating sensors and materials for ECG and SCG.

Microneedle Biomedical Systems: Design and Applications

Review of microneedles design, fabrication, sensing, and transdermal delivery; covers wearable integration, stimuli-responsive systems, skin-penetration and biofouling issues.

Design Requirements and Solutions for Medical Wearables

Technical overview of low-power solutions for medical wearables, covering RSL10/RSL15 SoCs, audio DSPs, miniaturization, power management, and regulatory considerations.

1.2mm x 1.0mm Miniature Crystal Oscillators: Techniques and Benefits

Technical overview of implementing 1.2mm x 1.0mm crystal oscillators, covering material selection, packaging, electrode techniques, frequency trimming, thermal management.

OLED Display: Key Advantages and Disadvantages

Technical summary of OLED displays' advantages (thin, flexible, wide viewing angle, true blacks, fast response) and disadvantages (shorter lifetime, burn-in, cost).

Design Challenges and Solutions for Wearable Devices

Technical overview of 2025 wearable trends and design: AI-driven health monitoring, advanced sensors, low-power MCUs, power management and BLE connectivity

Wearable Remote Patient Monitoring Using MAX86178

Technical overview of wearable RPM design using MAX86178 AFE and MAX77659 SIMO PMIC for low-power, compact continuous monitoring of ECG, SpO2, and respiration.

What Is a TMR Sensor? Output Compared with GMR and AMR

Technical overview of TMR sensors and quantum sensors, covering tunneling magnetoresistance, sensitivity and SWAP-C tradeoffs, and applications in navigation, automotive, and IoT.

Wearable Dry-Electrode ECG Patch with Optimized Geometry

Wearable gel-free ECG patch using gold thin-film dry electrodes and a hexagonal maze geometry for improved signal fidelity, wireless Bluetooth telemetry and biocompatibility.

Power Conversion Solutions for Low-Power Wireless Devices

Review of design requirements and ADI power conversion ICs for medical wearables, focusing on energy harvesting, ultra-low-power DC/DC converters and battery-extension techniques.

Sub-Femtomolar Flexible Electrodes for At-Home Sex Hormone Monitoring

Flexible PEDOT:PSS/AuNPs micropyramid immunosensor enabling sub-femtomolar electrochemical detection of salivary progesterone and estradiol for at-home monitoring.

CYW43012 Wi-Fi on Infineon Evaluation Kit

Guide to using the CYW43012 SDIO Wi-Fi/Bluetooth module on an evaluation board: hardware connections, 1.8V SDIO setup, BSP configuration and build steps.

Simplifying Mobile USB-C Design

Technical overview of USB-C charging challenges and how integrated USB-C buck charger ICs with built-in port controllers simplify power delivery and reduce BOM

Wearables' Role in Improving Healthcare Quality

Analysis of how wearables enable continuous vital sign monitoring—heart rate, SpO2, temperature—and the supporting sensors, analytics and Bluetooth connectivity for clinicians.

TPS631000 for Efficient, Compact Wearable Designs

Technical overview of TI TPS631000 buck-boost converter for wearables: 1.6–5.5V input, 1.2–5.3V output, 8μA quiescent current, compact SOT-583 package.

Five Design Challenges for Remote Patient Monitoring

Technical overview of wearable patient monitors and remote patient monitoring covering battery life, portability, patient safety, secure wireless transmission and integration.