RF Simulation Solutions for Mobile Handset Front-Ends

Overview of handset RF front-end challenges and 5G-driven growth, with simulation solutions for PCB modeling, field-circuit co-simulation, and SAW/BAW filter design.

ADI wearable VSM platform and sensor technologies

Technical overview of ADI's wearable VSM platform for engineers: sensor stack, PPG and ECG front ends, motion, EDA, temperature, and ADuCM3029 processing.

Wireless Li-Ion Charger with Integrated DC/DC for Wearables

Technical overview of the LTC4126 wireless charger receiver for wearables, detailing inductance-free DC-DC charge-pump, CC/CV charger, safety features, and ZVS transmitter pairing.

3 Common Charging Issues for Wearable Devices

Technical guide to selecting and troubleshooting linear chargers for wearable devices, covering bq24232, bq24040 and bq25100 issues like termination and oscillation.

Key Energy-Efficiency Tips for Wearable Devices

Low-power wearable design guide covering sleep modes, regulator and MOSFET selection, clock and RF optimization, and power budgeting to extend battery life.

360 8XS Kids Watch Teardown Reveals Multimode 4G

360 8XS teardown of a children's phone watch analyzing IPX8 waterproofing, Micro USB charging, PCB layout and Chinese-sourced main ICs including ASR3601.

Wearable Medical Electronics: Current Status and Safety Measures

Analysis of wearable medical electronics market trends, sensor and algorithm requirements, and engineering approaches to improve device safety for clinical and consumer use.

Managing BLE Peak Power with ICs and Plug-In Modules

Analysis of Bluetooth Low Energy (BLE) peak power profiles and low-power design strategies for wearables and IoT, guiding IC/module selection and energy-harvesting sizing.

Overview of Wearable Technology and Key Functions

Overview of wearable technology: architectures, sensors, energy harvesting, smart coaching, virtual assistants and mobile health monitoring for engineers.

Solving Battery Charging Challenges in Wearable Devices

Wearable power design overview: programmable battery charging, precise sub-1mA charge termination, ultra-low quiescent-current DC/DCs, load switching and boost converters.

Sensor-Based Wearables in Industrial and Factory Environments

Overview of industrial wearables and sensors: advances in AR smart glasses, ambient/proximity sensing, power modules, and field/warehouse use cases, plus deployment challenges.

Technologies Used in Wearable Device Design

Technical overview of capacitive sensing for wearables: low-power touch and proximity design, wear detection, gesture touchpads, robustness, signal processing, and cost trade-offs.

What Wearable Devices Will Win Consumers?

Analysis of shifting wearable expectations and AR headsets: on-device processing, machine learning integration, and evolving storage requirements for standalone devices.

Wireless Charging Solutions and Integration Trends

Technical overview of wireless charging market, circuit integration trends and five engineering considerations—driver integration, protocol emulation, thermal management, and efficiency.

FET1046A-C Carrier Board for Smart Light Pole Systems

Technical overview of smart light poles and system requirements, and a hardware solution using the FET1046A-C carrier board for 5G, Ethernet, and multi-sensor integration.

Can Industrial Internet Platforms Connect to 5G?

Overview of 5G-enabled industrial internet platforms: high-speed, low-latency, massive IoT connectivity with device management, real-time data collection and analytics.

Intelligent Medical Wearable Solutions

Power management and energy harvesting for medical wearables and remote patient monitoring, covering low?quiescent designs and LTC3331/LTC3107 implementations.

Achieving Processor Performance with Existing MCUs

Overview of Darwin MCU family: 32-bit Arm Cortex-M4 devices offering low-power operation, integrated memory, security features, and DSP/FPU support for embedded intelligence.