Category:PCB Assembly Solder Paste

Group Administrators: 1 | Group Member: 186 | Group Threads: 220

Solder paste is a material used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder through hole pin in paste components by print solder paste in/over the holes.

Thread Reply
solder wicking on components termination Reply 2017-02-28 20:36:58
249 views
4 comments
33 likes

Christian

Leave A Message

Follow

Hi, Recently we have encountered solder wicking on components termination (total of 13 pcs of components on one pcb)with Ag/Pd finishes during lead-free reflow soldering. The pcb is LF HASL surface finish and LF solder paste composition is SAC305.We tried to increase the solder paste thickness & prolong the soaking time BUT solder wick did happen again. Then we change to Ag/Ni/Sn termination component,we got a good solder fillets. Can anyone tell us what is happening ?
Thks
33 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

bobsled2010

Leave A Message

Follow

Please keep us up to date like this.

luizleo2001

Leave A Message

Follow

Your post answered my questions. Thanks a lot.

Bartley

Leave A Message

Follow

I have truly impressed by your post. Please keep us up to date like this.

effevalerio

Leave A Message

Follow

I like checking your post and hope your update comes soon.
ThreadReply