Category:PCB Assembly Raspberry Pi

Group Administrators: 1 | Group Member: 47 | Group Threads: 44

The Raspberry Pi is a series of small single-board computers developed in the United Kingdom by the Raspberry Pi Foundation to promote the teaching of basic computer science in schools and in developing countries.

Thread Reply
Compute Module and I/O Board Made by Raspberry Pi Reply 2017-02-12 00:39:47
446 views
1 comments
78 likes

sakchaisiri

Leave A Message

Follow

Following some interesting developments in the direction of access and open source at RaspberryPI – with Broadcomm driver release – Raspberry Pi releases today the Compute Module:
The compute module contains the guts of a Raspberry Pi (the BCM2835 processor and 512Mbyte of RAM) as well as a 4Gbyte eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated on to a small 67.6x30mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory*). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2835 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the module itself.
The Compute Module is primarily designed for those who are going to create their own PCB. However, we are also launching something called the Compute Module IO Board to help designers get started.
Interestingly enough, the module is complemented by a I/O board that is going to be open source:
The Compute Module IO Board is a simple, open-source breakout board that you can plug a Compute Module into.
78 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Breton

Leave A Message

Follow

Remarkable.
ThreadReply