Category:PCB PCB Manufacturing

Group Administrators: 1 | Group Member: 259 | Group Threads: 444

PCB manufacturing consists of many steps, such as PCB CAM, Panelization, Copper patterning, etc. This group is mainly talked about the problems during PCB manufacturing!

Thread Reply
How to calculate impedance Reply 2016-04-01 13:52:26
124 views
3 comments
20 likes

Bard

Leave A Message

Follow

How to calculate the impedance of a trace on the top layer when the solder mask has a dk of 4.5 and a thickness of 25um and the core beneath the trace has dk of 3.5 and a thickness of 2.54mm.
20 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Albert Basson

Leave A Message

Follow

What I used sometimes is the Er which is in the middle between the two Ers or I use the Er value of the thinner dielectricum which is placed closer to the reference plane. But the value is always not so right, so it is better to ask your PCB manufacturer.

wolffdp

Leave A Message

Follow

What you need is one of the reasons why it is important to ask PCB manufacturer to provide the final stackup and track geometry. They can calculate the values more precisely.

Vojtek Gábor

Leave A Message

Follow

I have learned a lot from your article. Quite useful and impressive info.
ThreadReply