What unit will you use when layout in mi

What unit will you use when layout in mil or mm?

2016/6/13 21:39:31

layout mil

I have been using 10 mil trace with 10 mil spacing. But my PCB vendors quote that they like traces down to 7 mil.

cgr-pcb

2016/12/28 19:50:44

It does not matter too much of the unit you use, as the software can change between the two units.

brian

2016/12/19 17:58:29

You can use whatever you want.

sean-maloney

2016/12/11 15:32:51

I think mils is the most used unit.

joerg.friedrichs

2016/12/10 19:21:36

It depends on the parts you're using and the capabilities of the manufacturer. If the manufacturer is using mils, then you need to use mil as unit.

ondrasebesta

2016/9/12 1:07:51

While the metric system is arguably saner, some people are pretty adamant about using mils. I think it has something to do with the machines used by manufacturers. So it depends on the manufacturer's prefer.

What unit will you use when layout in mil or mm?

You might like