Category:PCB PCB Design Rules

Group Administrators: 1 | Group Member: 160 | Group Threads: 272

Initially PCBs were designed manually by creating a photomask on a clear mylar sheet, usually at two or four times the true size. Starting from the schematic diagram the component pin pads were laid out on the mylar and then traces were routed to connect the pads. If you have many questions of PCB Design, please come here!

Thread Reply
modifying a pcb? Reply 2017-02-27 10:02:53
158 views
3 comments
19 likes

manuelnt11

Leave A Message

Follow

i have a bit of a problem. i need a 320x240 lcd with a 5.7" screen, and a max width of 146mm. i have checked with about a dozen manufacturers and 148mm is the smallest they make without custom designing the pcb, and this is prohibitively expensive. what im wondering is would it be possible to get one of these stock sizes and file 1mm off each side with out damaging the display? here is an example of the display im talking about:
19 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

sergio

Leave A Message

Follow

Awesome post. Like it very much.

Derrick

Leave A Message

Follow

Your sharing is quite useful to my new project. Thanks a lot.

Derrick

Leave A Message

Follow

It answered all my puzzles.Very helpful.
ThreadReply