Category:PCB PCB Design Rules

Group Administrators: 1 | Group Member: 160 | Group Threads: 272

Initially PCBs were designed manually by creating a photomask on a clear mylar sheet, usually at two or four times the true size. Starting from the schematic diagram the component pin pads were laid out on the mylar and then traces were routed to connect the pads. If you have many questions of PCB Design, please come here!

Thread Reply
Custom PCB Size and Outline Reply 2017-02-15 20:12:55
186 views
1 comments
29 likes

ARTURO

Leave A Message

Follow


Custom PCB outline and size is determined by the transmission way of SMT machine and assembly range.


1. PCB Outline
(1) when the PCB was positioning on SMT working platform and transfering PCB through platform, there will be no special requirements for the outline of PCB board.
(2) when directly using guide rail to transfer PCB, its outline must be straight. If it is a PCB with unregular outline, it must be designed with break-away to make PCB outline as a straight line.
2. PCB Size
(1)PCB size is determined by the range of SMT, engineers should consider SMT machine X and Y direction of the maximum and minimum size while designing PCB, as well as the maximum and minimum PCB thickness.
(2)When PCB size is less than the minimum assembly size, it must use the way of panelization, which can save time,improve the utilization rate of machines and efficiency of pcb assembly.
29 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Charlie

Leave A Message

Follow

I am going to keep checking for new writings.
ThreadReply