PCB companies in center/south Europe usually use mil.
Nigel?Nichols
2016/9/4 19:16:20
Most use Mils
You will find it very convenient if you use mils.Because most PCB manufacturers also use mils and also the datasheets are in mils as a more easy way.
Greg Smart
2016/8/23 4:23:08
Mils is mostly used. But sometimes you can use mm, such as If you are using the newer 2mm pitch parts
Andrew?Ward
2016/6/9 22:20:21
Meter is the common measure standard in my country , so I converted every inch-based value to millimeters and used it in my CAD-tool.
Paolo
2016/10/16 20:28:18
PCB companies in center/south Europe usually use mil.
Nigel?Nichols
2016/9/4 19:16:20
Most use Mils You will find it very convenient if you use mils.Because most PCB manufacturers also use mils and also the datasheets are in mils as a more easy way.
Greg Smart
2016/8/23 4:23:08
Mils is mostly used. But sometimes you can use mm, such as If you are using the newer 2mm pitch parts
Andrew?Ward
2016/6/9 22:20:21
Meter is the common measure standard in my country , so I converted every inch-based value to millimeters and used it in my CAD-tool.