Category:PCB Assembly PCB Assembly Service

Group Administrators: 1 | Group Member: 249 | Group Threads: 393

In assembly the bare board is populated with electronic components, called a "printed circuit board assembly" (PCBA). In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB.

Thread Reply
Any clues? no-clean vs. water soluble Reply 2017-03-01 03:46:39
130 views
1 comments
24 likes

ciostef

Leave A Message

Follow

http://www.smtnet.com/electronicsforum/view_message.cfm?message=9584&
John Thorup touched on some applications where no-clean fluxes could be a bad idea. I'm looking for some more detailed info. (papers, references, texts, comparative test results, links, anything) that I can gain a little insight with. Our management is once again licking their chops at the idea of eliminating the wash process, and I'm sure that design is going to request some pretty beefy motivation before they agree to try and qualify product built to that spec.
Any clues? Thanks, guys.
24 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

sigibit

Leave A Message

Follow

You are a genuis!
ThreadReply