Category:PCB Flex & Rigid-Flex PCB

Group Administrators: 1 | Group Member: 33 | Group Threads: 31

Rigid flex circuits have been used in the military and aerospace industries for more than 20 years.Rigid flex circuits combine the best of both rigid boards and flexible circuits integrated together into one circuit. The two-in-one circuit is interconnected through plated thru holes. Rigid flex circuits provide higher component density and better quality control.

Thread Reply
Pre-processing of FPC Reply 2017-05-06 18:34:19
94 views
1 comments
1 likes

Toni

Leave A Message

Follow

After coating process, the exposed copper conductor surface of FPC may have adhesive or ink pollution, oxidation and discoloration caused by high temperature process. In order to get attached the coating of good adhesion, the conductor surface contamination and oxide layer must be removed to keep surface clean. It can be said that the pre-treatment cleaning process will have a significant impact on the basic characteristics of the flexible printed circuit board, you must pay full attention.
1 likes
Statement: This post is only the personal view of the author and does not represent the opinions of ALLPCB.com.

Luis Fernando

Leave A Message

Follow

keep surface clean is very important.
ThreadReply