Quote by Sales
Cart 0
Thank you very much for your valuable suggestion!
We will solve it as soon as possible!

What is the premise of this PCB assembly note?

2 857

I have read a note:Bake bare PCBs in a clean and well ventilated oven prior to assembly at 125 degree for 24 hours.What does this mean?

Follow Us: More
May 25 at 10:36
Toni

If a typical stackup is as following: there is a thick substrate between the middle plane. there really isn't much of a difference for the two stack-up. You ought to have slightly better noise immunity and EMI shielding on the inner layer, though. You haven't specified what flavour of signals you are dealing with; as long as it's not too exotic,a change like this can be ignored at all.

Nov 3 at 13:24
bruce_baldwin

What you can do is have Layer 1, 2, 3 close together. All your fast edges would be contained on the top layer, so that you have access to a reference plane and have the coveted inter-plane capacitance. And layer 4 would be treated as if it was a single layer board. You would need to run return path adjacent to each signal. So you could have ground on the 4th layer if you choose too, but, it doesn't make sense too if you have a ground already in one of the mid layers.

Nov 7 at 21:35
Enrique Ochoa Vazquez
1
15 30 50 per page

Your Answer

Not the answer you're looking for?

ask your own question.