Quote by Sales
Cart 0
Thank you very much for your valuable suggestion!
We will solve it as soon as possible!

In a four layer PCB, will the layer order matters?

3 1K

Does it matter when changing the order of the inner layer of four layer PCB?

Follow Us: More
Jun 30 at 18:46
Nick Jay

If you put a big copper plane for ground on layer 2 and another one for power on 3 and assign them to the ground and power nets respectively. When you glood the copper, PADS will connect them as you want.

Jul 2 at 13:25
Arcadia Lis

You can use a via for your purpose. It is probably the power planes are internal. Use a via to connect from the signal planes to the internal power or ground plane.

Sep 9 at 07:44
Bob srfdeiasn

Using a via can make connection with ground plane.In case of surface-mount component, there is separate via connected to the surface-mount pad. In case of throughole component, the pin is soldered into the via.

Oct 16 at 18:01
Technology lover
1
15 30 50 per page

Your Answer

Not the answer you're looking for?

ask your own question.